Aluminum Checkered Tread Plate Coil

60sQuick response in 60 seconds

24h24-hour online service

365d365 days tracking service

Aluminum Checkered Tread Plate Coil

Alloy: 1050, 1060, 3003, 3103, 5026, 5052, 5083, 5086, 5754, 6082, 6061, 7020.

Temper: F, O, H111, H114, H116, H224, H244, T4, T6, T61.

Pattern Type: Lentil pattern, needle pattern, diamond, 2 bar/3 bar/5 bar checker plate, small/big 5 bar.

Pattern Height: 0.8mm-1.5mm.

Thickness: 1.2mm-8mm.

Width: 100mm-1850mm.

Surface treatment : Mill finish, bright finish, anodized.

Color:Black, sliver, blue, etc. or customized.

Standard:GB/T3618, Q/EL432, EN 1386, ASTM-B209 or according to your needs.

Email ( )

we will reply to you within 24 hours.

What is an aluminum checkered plate?

The aluminum checkered plate is also called an aluminum tread plate because its primary function is anti-skid, so it is also called an anti-skid aluminum plate. It is an aluminum plate made by rolling, pickling, embossing, anodizing, and other processing technology. It has a raised texture pattern on the surface.

The aluminum checkered plate is widely used, but its main function is to prevent the floor from slipping. At the same time, it also increases the durability and aesthetics of floors such as floors or stair treads.

Tread plate vs. Checkered plate

Tread plate refers to a plate with a raised pattern on the surface and anti-slip function. It is usually used to lay walkways, ramp surfaces, or stair treads in factories, warehouses, and docks to increase friction and improve walking safety.

The surface of the Checkered plate also has a raised pattern and is also anti-slip, but unlike a tread plate, a checked plate can not only be used as an anti-skid aluminum plate but also used to make decorative floors, walls, tool boxes or railings, etc.

To sum up, tread plates and checked plates are both anti-board materials, but their surfaces and uses are different.

Hot-Selling aluminum checker plate

Xienuo's aluminum checker plates can be customized to a full range of specifications, with many types of patterns and special sizes. You can contact us for customization and check out Xienuo's customizable specifications.

According to alloy

1000 series aluminum tread and checker plate

1000 series aluminum alloy is pure aluminum alloy. The alloys used to make aluminum tread and checkered plates are usually 1050 and 1060. They are low-cost, easy to process, and low in strength, and their corrosion resistance and anti-rust properties are not as good as those of the 3000 series and 5000 series. It is suitable for places with low usage intensity, such as cold storage, general anti-slip floors, etc.

  • 1050 aluminum tread checkered plate
  • 1060 aluminum tread checkered plate

3000 series aluminum tread and checkered plates

3000 series is an AL-Mn alloy aluminum plate, which has good anti-rust performance, formability, moderate strength, and other characteristics. It is often used in stair treads, floors, floors of commercial vehicles, and other vehicles.

  • 3003 aluminum tread checkered plate
  • 3103 aluminum tread checkered plate

5000 series aluminum tread and checkered plates

Compared with 1000 series and 3000 series alloys, 5000 series alloys have better corrosion resistance, higher strength and rust resistance, and higher load-bearing capacity. They are used in humid or corrosive environments, such as Anti-skid aluminum plates used on ships and stair treads are mostly made of 5000 series anti-skid aluminum plates.

  • 5052 aluminum tread checkered plate
  • 5083 aluminum tread checkered plate
  • 5086 aluminum tread checkered plate
  • 5754 aluminum tread checkered plate

6000 series aluminum tread and checkered plates

The 6000 series alloy is an alloy with added magnesium and silicon elements, which can further improve the corrosion resistance of the checker plate. It has high strength, good processing performance, and welding performance, and is suitable for use in more complex environments.

  • 6082 aluminum tread checkered plate
  • 6061 aluminum tread checkered plate

According to the pattern

  • 2 bar aluminum tread and checkered plate sheet
  • 3 bar aluminum tread and checkered plate sheet
  • 5-bar aluminum tread and checkered plate sheet
  • Aluminum diamond plate sheet coil
  • Lentil pattern aluminum tread checkered plate sheets
  • Needle pattern aluminum tread checkered plate sheets

Xienuo can produce checkered plates with various patterns, such as 2-bar, 3-bar, 5-bar, diamond, lentil, needle, and lentil-shaped aluminum checkered plates. If you don’t have the pattern you need, you can contact us for customization.

The pattern height can reach 0.8-1.2mm, and the pattern is protruding, which can have a good anti-slip effect.

Pattern types of aluminum checker plate

The surface is smooth and free of oil stains, and the decorative performance is good. At the same time, we can also provide anodized aluminum tread and checkered plates, which have a long service life and good wear resistance.

According to surface treatment

  • Bright Finish Tread and checked Plate Sheets
  • Mill Finish Aluminum Tread Checkered Plate Sheets
  • Anodized Aluminum tread and checkered plate sheet

surface types of aluminum checkered plates

In addition, Xienuo can also use powder electrostatic spraying and fluorocarbon resin paint spraying to treat the surface of aluminum checkered plates according to customer requirements to extend the service life and increase the aesthetics.

According to thickness

  • 0.063” (1/16”) Aluminum tread checker plate
  • 0.25” (1/4”) Aluminum tread checker plate
  • 0.100” Aluminum tread checker plate
  • 0.125” (1/8”) Aluminum tread checker plate
  • Aluminum diamond plate sheets 4'x8'(48" x 96")
  • Aluminum diamond plate sheets 5'x16'(48" x 192")
  • Aluminum diamond plate sheets 5'x8'(60" x 96")
  • Aluminum diamond plate sheets 5'x16'(60" x 192")

As an aluminum processing factory with 25 years of experience, Xienuo has the ability to produce aluminum checker and tread plates of various sizes. For details, you can check the customizable sizes, or you can contact us directly to customize tread and checkered aluminum plates.

0.063” thick aluminum checkered plate is a more common thickness of checkered plate and is commonly used in floors, commercial vehicle side panels, car fenders, truck toolboxes, etc. 0.100” thick aluminum tread and checkered plate has strong strength and can be used for stair treads, trailer floors, suspended stairs, etc.

Xienuo customizable checkered plate specifications

  • Product Name: Aluminum diamond plate, Aluminum checker plate, Aluminum checker plate, Aluminum tread checkered plate, Aluminum durbar floor plate.
  • Alloy:1050, 1060, 3003, 3103, 5026, 5052, 5083, 5086, 5754, 6082, 6061, 7020
  • Temper: F, O, H111, H114, H116, H224, H244, T4, T6, T61
  • Pattern Type: Lentil pattern, needle pattern, diamond, 2 bar/3 bar/5 bar aluminum checker plate sheet, small 5 bar, big 5 bar
  • Thickness: 1.2mm-8mm
  • Width: 100mm-1850mm
  • Length: 500mm-16000mm
  • Pattern Height: 0.8mm-1.5mm
  • Surface Treatment:Mill finish, bright finish, anodized
  • Color: Black, sliver, blue, etc. or customized
  • Surface Protection: Protective film is optional
  • Package: Wooden frame/wooden box packaging, steel belt fixed
  • Standard: GB/T3618, Q/EL432, EN 1386, ASTM -B209 or according to your needs

Chemical and mechanical properties

Chemical Composition (For Reference)

Chemical Composition
Alloy Chemical Element
Alloy Si Fe Cu Mn Mg Cr Zn Ti Others:
Al: Min.
1050 0.25 0.40 0.05 0.05 0.05 - 0.07 0.05 0.03 - 99.50
1060 0.25 0.35 0.05 0.03 0.03 - 0.05 0.03 0.03 - 99.60
1100 0.95 Si + Fe 0.05~0.20 0.05 - - 0.10 - 0.05 0.15 99.0
3003 0.60 0.70 0.05~0.20 1.0-1.5 - - 0.10 - 0.05 0.15 remainder
3105 0.60 0.70 0.03 0.3-0.8 0.2-0.8 0.20 0.40 0.10 0.05 0.15 remainder
5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 - 0.05 0.15 remainder
5083 ≤0.4 ≤0.4 ≤0.1 0.40-1.0 4.0-4.9 0.05-0.25 0.25 ≤0.15 0.05 0.15 remainder
5086 ≤0.4 ≤0.5 ≤0.1 0.2-0.7 3.5-4.5 0.05-0.25 ≤0.25 ≤0.15 0.05 0.15 remainder
5754 0.40 0.40 0.10 0.50 2.6~3.6 0.30 0.20 0.15 0.05 0.15 remainder
6061 0.4 - 0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 remainder
6082 0.7-1.3 0.5 0.1 0.4-1.00 0.06-1.2 0.25 0.2 0.1 0.05 0.15 remainder

Mechanical Properties (For Reference)

Mechanical Properties
Item Value
Tensile Strength, Ultimate 90 ~ 305 Mpa
Tensile Strength, Yield 35 ~ 250 Mpa
Hardness, Brinell 28 ~ 88

Different alloys and different Tempers have greatly different mechanical properties. Please consult our aluminum product experts for details.

How to clean aluminum checker plate

Aluminum tread and checker plates are used as decorative or non-slip aluminum plates that are directly exposed to the outside. Under normal circumstances, the contact between the aluminum checker plate and the air will naturally form an oxide film that can prevent the aluminum checkered plate from deeper oxidation and corrosion. At the same time, the aluminum checker plate will still have dirt attached to the surface of the checker plate. So, how to clean an aluminum tread and checker plates?

  1. Choose appropriate detergent, such as using neutral detergent as much as possible to avoid corrosion of the aluminum checker and tread plate.
  2. Choose appropriate cleaning tools, such as soft cotton rags, etc. to ensure that the surface of the aluminum checker and tread plate will not be scratched.
  3. Avoid cleaning too frequently and avoid cleaning when the aluminum checker and tread plate is still at high temperature.
  4. Rinse all detergent thoroughly

In short, when cleaning, you can first choose a scrubbing method to target stains on the surface of the aluminum tread plate, choose appropriate cleaning tools, and then rinse repeatedly with water and other neutral detergents.

Aluminum diamond plate near me

“Aluminum tread plate near me” is a multinational customer service of Xienuo Enterprise, we are committed to providing customers with the experience of shopping at home.

Xienuo has dealer partners in different countries. Welcome to consult us to learn about the aluminum tread plate near you.

Why choose us?

Xienuo Enterprise is a professional Aluminum tread and checkered plate manufacturer and supplier. It was born from Lvyuan Aluminum Industry established in 1999. We have molds with complete specifications and can customize the production of tread plates with many types of patterns. The pattern height can be adjusted according to your needs.

let's get connected

Aluminum experts are online to answer any questions you may have, please contact us.

For information on how Xienuo Enterprise uses your information, read our Privacy Policy.

Need Some Help?

Based on the high quality and complete after-sales service, our products have been exported to more than 76 countries and regions. Xienuo Enterprise has been the choice of more than 80,000 customers.

  • Our customer service team is here to help you 24/7.
  • We can provide free samples or make samples on demand.
  • Whatever you need, we are here for you.

Factory Address

Industrial Area,
Gongyi City,
Henan Province,China

Office Address

B306 No.1 Building, No.11 Lianhua Street, High-Tech Zone,
Zhengzhou city
Henan Province,China